ETA confirmed after ordering or call: 0800 254 5655
Salicru's SPS ADVANCE RT2 series is a versatile solution for protecting a wide range of IT equipment, covering basic servers, routers, switches, hubs, and point-of-sale with high power density needs, as well as rack placement of servers and communications.
Salicru's SPS ADVANCE RT2 series is a versatile solution for protecting a wide range of IT equipment, covering basic servers, routers, switches, hubs, and point-of-sale with high power density needs, as well as rack placement of servers and communications.
This UPS has line-interactive technology, a sine wave output voltage, and a tower/rack structure with a 2U rack height. Furthermore, its output power factor of 0.9 and compatibility with APFC (Active Power Factor Correction) type loads make it the ideal solution for any sort of protected load.
It has an RS-232/USB interface that is compatible with the HID standard, as well as a smart slot that can be used for an SNMP card, MODBUS, or potential-free contacts. Software for monitoring and managing protected devices is also available. Other important features include solutions for long backup applications (via equipment with additional chargers and battery modules), swivel mount display and adapters (pedestal and lugs) for mounting in tower or rack formats, and programmable outputs (critical/non-critical loads) to extend the available backup.
Features & Benefits:
Please Note: Rack Rail Kit sold separately
| Technical Specifications | |
|---|---|
| Technology | Line-interactive |
| Format | Convertible tower/rack (2U) |
| Input | |
| Rated voltage | 208 / 220 / 230 / 240 V |
| Voltage range 100% load | 170 ÷ 280 V |
| Stabiliser | AVR (Buck & Boost) |
| Rated frequency | 50 / 60 Hz (auto-detection) |
| Frequency range | ±5 Hz |
| Auto~detection of frequency | Yes |
| Protection | Fuse (800/1100) or resettable thermal cutoff (1500/2000/3000) |
| Output | |
| Power factor | 0.9 |
| Rated voltage | 208 / 220 / 230 / 240 V |
| Voltage accuracy (battery mode) | ±1.5% |
| Power (VA/W) | 1100 / 990 |
| Total harmonic distortion (THDv) | < 2% linear load / < 5% non-linear load |
| Waveform (battery mode) | Pure sine wave |
| Frequency | 50/60 Hz (same as input) |
| Frequency accuracy (battery mode) | ±0.1Hz |
| Admissible overloads in battery mode | < 120% off at 1 min / < 150% off at 10 s |
| Admissible overloads in-line mode | < 120% off at 5 min / < 150% off at 10 s / >150 %: 1 s |
| Socket type | IEC |
| No. Of sockets | 8 |
| Programmable sockets | Yes, for critical / non-critical loads (4/4) |
| Battery | |
| Battery type | Pb-Ca sealed, AGM, maintenance-free |
| Charge type | I/U (constant current/constant voltage) |
| Recharge time | 4 hours to 90% |
| Battery test | Automatic on every start + one x week |
| Charger | |
| Temperature voltage compensation | Yes |
| Communication | |
| Ports | RS-232/USB-HID |
| Intelligent slot | Slot for SNMP/potential-free contacts/ MODBUS |
| Monitoring software | For Windows, Linux and Mac |
| Indications | |
| Type | LCD + keypad |
| Values | Voltage, power and input and output frequency / Battery voltage / % battery charge / % load / Operating mode / Fault / Discharge time / Mute |
| Operating modes | Normal / Stabilisation (AVR) / Battery / Fault |
| Alarm | Output battery mode, polarity, low battery (back up time), charger failure and overload |
| Audible | Every 10 s for battery operation. Every 2 s for low battery / Polarity. Every 1 s for overcharge. Continuous for fault. |
| Failure | Display LCD |
| Other Functions | |
| Cold start (start-up from batteries) | Yes |
| Emergency stop (EPO) | Yes |
| ADSL/fax/modem transient protector | Yes |
| Green-function | Yes, automatic stop in battery mode with load <5% |
| Smart fan speed | Yes, smart control of fan speed |
| Site wiring fault | Yes, error detection of phase-neutral rotation and/or absence of earth |
| General | |
| Operating temperature | 0° C ÷ 40° C |
| Relative humidity | Up to 95%, non-condensing |
| Maxium operating altitude | 2,400 masl (power degradation up to 5,000 m) |
| Acoustic noise at 1 metre | < 45dB |
| Standards | |
| Safety | EN-IEC 62040-1 |
| Electromagnetic compatibility (EMC) | EN 62040-2:2006(C2) |
| Operation | EN 62040-3:2011 |
| Quality and environmental management | ISO-9001 & ISO-14001 |
| Dimensions | |
| Depth (mm) | 410 |
| Width (mm) | 438 |
| Height (mm) | 88 |
| Weight | |
| Weight (kg) | 9 |
Estimated delivery cost for Salicru 6A0CA000007 SPS ADVANCE RT2 1100VA/990W 230V Line Interactive UPS 2U, Extended Runtime is £0.
Everyone is looking for the best prices and even saving a few pounds can make a big difference. That’s why we’ll match the price of a product if you find it cheaper elsewhere.
Here at UPSBuyer, we offer 1000s of products and are confident most of our prices are lower than our competitors.
